Nissan versa HR15DE MR18DE DRIVE BELTS
Component1. | Alternator | 2. | Drive belt auto–tensioner Water pump | 3. | Crankshaft pulley Drive belt Indicator |
Owner’s Manual/Service Manual order information Genuine NISSAN Service Manuals for this model year and prior can be purchased. A genuine NISSAN Service Manual is the best source of service and repair information for your vehicle. Nissan Juke Service and Repair Manual: Engine Lubrication System HR16DE. Nissan Juke Service and Repair Manual / Engine Lubrication System HR16DE.
These repair manuals for Nissan Sentra describes the models from 1982 to 2015, they are equipped with gasoline and diesel powertrains. The manuals cover issues not only related to repairs, but also explain the safety, operation, and maintenance instructions of the Nissan Sentra. Nissan 350Z Owners & PDF Service Repair Manuals Below you will find free PDF files for select years of your Nissan 350Z automobile 2003 Nissan 350Z Owners Manuals.
Checking Drive Belts
WARNING:
Be sure to perform this step when the engine is stopped.
●Make sure that the indicator (notch on fixed side) of drive belt auto-tensioner is within the possible use
range (A).
NOTE:
●Check the drive belt auto-tensioner indication when the engine is cold.
●When new drive belt is installed, the indicator (notch on fixed side) should be within the range (B).Visually check entire drive belt for wear, damage or cracks.
●If the indicator (notch on fixed side) is out of the possible use range or belt is damaged, replace drive belt.
Tension Adjustment
Belt tension is not necessary, as it is automatically adjusted by drive belt auto-tensioner.
Removal and Installation
REMOVAL
1.Hold the hexagonal part (A) of drive belt auto-tensioner (1) with a wrench securely. Then move the wrench handle in the direc¬tion of arrow (loosening direction of tensioner).
CAUTION:
Never place hand in a location where pinching may occur if the holding tool accidentally comes off.
2.Insert a rod such as short-length screwdriver approximately 6 mm (0.24 in) in diameter into the hole (B) of the retaining boss to fix drive belt auto-tensioner.
3.Remove drive belt.