Bloglog131

Harbor Freight 12 In X 33 3 8 4 Hp Wood Lathe With Reversible Head Product Manual 2000 Manual for the 34706 12' x 33-3/8' Wood Lathe with Reversible Head 34706 Wood Lathe w/ Reversible Head - 12' x 33-3/8'. This Enco lathe manual also has proper lubrication instructions and wiring diagrams. The manual includes a complete set of explosive view diagrams of all the parts with parts list and descriptions for this Enco 12″ x 36″ Metal Lathe. These lathes were also sold as a Central Machinery model TD1440E lathe and a Tida TD-1440 lathe.

8” Drill Press

Model 44505

Set up and Operating Instructions

Visit our website at: http://www.harborfreight.com

Read this material before using this product. Failure to do so can result in serious injury. Save this manual.

Copyright© 2010 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

Contents

Important SAFETY Information 3

General Tool Safety Warnings 3

Grounding Instructions 5

110-120 V~ Grounded Tools: Tools with Three Prong Plugs5

Drill Press Safety Warnings 5

Specifications 8 Unpacking 8

Instructions for putting

into use 8

Assembly/Mounting 8

Operating Instructions 10

Tool Set Up 10

Work Piece and Work Area

Set Up 10

General Operating Instructions 11

Maintenance And Servicing 12

Cleaning, Maintenance, and Lubrication 12

Troubleshooting 14

Parts Lists and Diagrams 15

Head Assembly Parts List 15 Head Assembly Diagram 16

Parts List and Diagram A - Pulley and Spindle 17

Parts List and Diagram B - Chuck and Spindle Shaft 18

Parts List and Diagram C -

Base and Table 19

LIMITED 90 DAY WARRANTY 20

Save This Manual

Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

Important SAFETY

Information

In this manual, on the labeling, and all other information provided with this product:

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

Central Machinery Lathe Owners Manuals

DANGER indicates a hazardous situation which, if not avoided, will result

in death or serious injury.

WARNING indicates a hazardous situation

which, if not avoided, could result in death or serious injury.

CAUTION, used with the safety alert

symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE is used to address practices not

related to personal injury.

CAUTION, without the safety alert symbol, is

used to address practices not related to personal injury.

General Tool Safety Warnings

WARNING Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Central Machinery T33274 Lathe Manual

Save all warnings and instructions for future reference.

1.KEEP GUARDS IN PLACE and in working order.

2.REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on.

3.KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

4.DON’T USE IN DANGEROUS ENVIRONMENT. Don’t use power tools in damp or wet locations, or expose them to rain. Keep work area well lighted.

5.KEEP CHILDREN AWAY. All visitors should be kept safe distance from work area.

6.MAKE WORKSHOP KID PROOF with padlocks, master switches, or by removing starter keys.

7.DON’T FORCE TOOL. It will do the job better and safer at the rate for which it was designed.

8.USE RIGHT TOOL. Don’t force tool or attachment to do a job for which it was not designed.

RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS

(120 VOLT)

TABLE A

9.USE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Table A shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.

10.WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts. Nonslip footwear is recommended. Wear protective hair covering to contain long hair.

11.ALWAYS USE SAFETY GLASSES. Also use face or dust mask if cutting operation is dusty. Everyday eyeglasses only have impact resistant lenses, they are NOT safety glasses.

12.SECURE WORK. Use clamps or a vise to hold work when practical. It’s safer than using your hand and it frees both hands to operate tool.

13.DON’T OVERREACH. Keep proper footing and balance at all times.

14.MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories.

15.DISCONNECT TOOLS before servicing; when changing accessories, such as blades, bits, cutters, and the like.

16.REDUCE THE RISK OF

UNINTENTIONAL STARTING. Make sure switch is in off position before plugging in.

17.USE RECOMMENDED ACCESSORIES. Consult the owner’s manual for recommended accessories. The use of improper accessories may cause risk of injury to persons.

18.NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the cutting tool is unintentionally contacted.

19.CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function – check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation.

A guard or other part that is damaged should be properly repaired or replaced.

20.DIRECTION OF FEED. Feed work into a blade or cutter against the direction of rotation of the blade or cutter only.

21.NEVER LEAVE TOOL RUNNING

Central Machinery Wood Lathe Manual

UNATTENDED. TURN POWER OFF. Don’t leave tool until it comes to a complete stop.

Grounding Instructions

To prevent electric shock

and death from incorrect grounding wire connection

Read and follow these instructions:

110-120 V~ Grounded Tools: Tools

with Three Prong Plugs

1.In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock.

This tool is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.

2.Do not modify the plug provided – if it will not fit the outlet, have the proper outlet installed by a qualified electrician.

3.Improper connection of the equipmentgrounding conductor can result in a risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment-grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal.

4.Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the tool is properly grounded.

5.Use only 3-wire extension cords that have 3-prong grounding plugs and

3-pole receptacles that accept the tool’s plug.

6.Repair or replace damaged or worn cord immediately.

125 V~ 3-Prong Plug and Outlet

(for up to 125 V~ and up to 15 A)

7.This tool is intended for use on a circuit that has an outlet that looks like the one illustrated above in 125 V~ 3-Prong Plug and Outlet. The tool has a grounding plug that looks like the plug illustrated above in 125 V~ 3-Prong Plug and Outlet.

8.The outlet must be properly installed and grounded in accordance with all codes and ordinances.

9.Do not use an adapter to connect this tool to a different outlet.

Drill Press Safety Warnings

For Your Own Safety Read Instruction

Manual Before Operating Drill Press

1.Wear eye protection.

2.Do not wear gloves, necktie, or loose clothing.

3.Clamp workpiece or brace against column to prevent rotation.

4.Use recommended speed for drill accessory and workpiece material.

5.Do not operate with ANY guard disabled, damaged, or removed.

6.The use of accessories or attachments not recommended by the manufacturer may result in a risk of injury to persons.

7.When servicing use only identical replacement parts.

8.Only use safety equipment that has been approved by an appropriate standards agency. Unapproved safety equipment may not provide adequate protection.

Eye protection must be ANSI-approved and breathing protection must be

NIOSH-approved for the specific hazards in the work area.

9.Industrial applications must follow OSHA guidelines.

10.Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

11.Avoid unintentional starting. Prepare to begin work before turning on the tool.

12.People with pacemakers should consult their physician(s) before use.

Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.

13.WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contains chemicals known [to the State of

California] to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•Lead from lead-based paints

•Crystalline silica from bricks and cement or other masonry products

• Arsenic and chromium from chemically treated lumber

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health

& Safety Code § 25249.5, et seq.)

14.WARNING: Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. (California Health &

Safety Code § 25249.5, et seq.)

15.The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur.

It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

Vibration Safety

This tool vibrates during use. Repeated or long-term exposure to vibration may cause temporary or permanent physical injury, particularly to the hands, arms and shoulders. To reduce the risk of vibration-related injury:

1.Anyone using vibrating tools regularly or for an extended period should first be examined by a doctor and then have regular medical check-ups to ensure medical problems are not being caused or worsened from use. Pregnant women or people who have impaired blood circulation to the hand, past hand injuries, nervous system disorders,